Ten Things Everyone Misunderstands About The Word "Fireplace Wall Mount"

Add Warmth to Your Home With a Fireplace Wall Mount

A fireplace wall mount can add warmth and ambiance to any space, whether in your home, office, or commercial space. These units are generally simple to install and include mounting brackets to hang or recessing into walls.

Follow the steps on the site of the manufacturer to make a simple, quick installation. Verify that the fireplace's bottom and wall-mounting bracket are able to are compatible. Then, you can secure the fireplace to the wall.

Size

A wall-mounted electric fireplace can be a focal point within a room that creates warmth and atmosphere. They are available in a range of sizes to match most any space. A smaller unit is ideal for bedrooms, while a larger one could be placed in a living or family room. Some models also come with a recessed option for installing them in a flush position against the wall to create an uncluttered appearance.

The height of a fireplace wall mount can affect the way it appears in the room. To create a dramatic effect some people opt to put them higher on the wall, typically 6 to 12 inches above the ground. Others prefer to place them at the normal TV height of 4.5 to 5 feet which allows the fire to be seen from all seating positions in the room.

Whatever size you decide to go with, there are some important aspects to take into consideration to ensure that your fireplace is safe and effective. For instance, you must make sure that all combustible things are kept at a minimum of three feet away from the flame including furniture and drapes. Additionally, you must make sure that the brackets for mounting are secured to the studs, if possible. If you are unable to locate studs, you can use plastic anchors. This will ensure that the fireplace will not be pulled away.

When choosing a fireplace mount, it is important to take into consideration the amount of heat it produces. In general, you should select a model which produces approximately the same amount of heat as an average electric heater. By following this rule of thumb you can be sure that your new fireplace will be able to provide sufficient supplemental heating for the entire space.

Certain fireplaces come with distinctive features that set them apart from other fireplaces. For instance, some fireplaces come with remote control operation and adjustable brightness settings and no-heat options. They also have cool-to-the-touch glass and realistic-looking LED flames. Other noteworthy features include a built-in shelf to hold electronic devices, and a simple, no-professional-help installation process.

Installation

In contrast to a built-in electric fireplace that requires a hard-wired connection to the electrical system of your home, a fireplace wall mount is semi-permanent. It can be installed directly onto the wall or put into the bracket which is fixed to the wall. It is important to select a location close enough to an outlet to allow the power cord reach it, while allowing for sufficient clearance from nearby objects. This is in accordance with the manufacturer's guidelines in the owner's manual.

Before starting the installation process, make sure that your fireplace is in good properly by plugging it in and playing around with its LED lights and the heat settings. This will tell you whether the fireplace is ready to be installed or if additional testing is required.

Then, you need to plan the area where you intend to install the fireplace wall mount. Depending on the model that you purchase, this could mean the installation of a bump on the wall or covering the existing wall with drywall. In the second case you should use the correct drywall techniques like mudding and tape. Let it completely dry before proceeding.

After the walls have been prepped and the bracket is secured to the wall using screws. It is recommended that they be placed into the studs that are behind the drywall. This will stop the fireplace from slipping away from the wall in the future.

When the bracket is secured, it is time to put the fireplace in itself. It can differ between models, but generally, there is a ledge where the fireplace will rest and a place to attach it to the brackets at the top. It is then possible to add any additional media like stones, embers, or logs inside the fireplace.

Alternatively, some models allow you to mount the firebox and screen together to form a wall bracket. This makes installation even simpler however it is essential to ensure that everything fits correctly and is tight before the final step.

Once the fireplace is placed, you can complete the appearance by tacking or screwing the bracket to the wall and trimming any wires that aren't needed. You could also think about using paintable wire covers to disguise the power cord, if you want.

Safety

A fireplace wall mount lets you to heat your home while saving valuable floor space. It is crucial to take security precautions when using this kind of fireplace. To prevent electric shock the first step is to ensure that the unit is grounded. Make sure you read the instructions given by the manufacturer to ensure the proper use.

It is possible to purchase wall-mounted electric fireplaces that don't generate heat, but most of them come with a heater to enhance the realistic nature of the flame effects. This is usually in the form of a fan-forced heater that blasts air through a heating element, however some models could have an infrared heater too.

Once the fireplace has been installed, it is crucial to stay clear of touching the hot surface. This can cause burns or damage the appliance. In addition, you should keep all combustible objects at least three feet from the fireplace to minimize fire risks. Be sure not to block vents at the back of the unit.

There are other security features to consider when selecting the wall mount for your electric fireplace. For instance, check that the unit has an emergency shutoff switch to avoid ethanol fires or overheating. It's also a good option to select a model with a lower output of heat, as it will help save energy.

Another important consideration is the material the surround is made from. Choose a material which is safe for pets as well as children such as wood veneers, steel, or glass. In addition, select a model that has an LCD display or remote control to enable you to operate it effortlessly.

There are many different types of electric and Ethanol Fire wall-mounted fireplaces. The best fireplace for you will depend on your budget and home's design. Whether you choose an electric or ethanol fire fireplace, you can be certain that it will bring the warmth and sophistication to your home. But, it is important to follow the manufacturer's safety tips and keep your family, friends and pets safe when using this fireplace.

Style

The design of the fireplace wall mount will determine how it appears on your walls. Certain models are designed to stand out, while others blend into your room's décor. For instance, a modern model like the Streamlined wall-mounted electric fireplace has a a sleek front glass face and a minimalist design. It has top venting which allows heated air to flow smoothly, while maintaining the elegant design of the fireplace. Its flat mounting and easy-to use remote make it easy to operate.

There are also wall-mount electric fireplaces with mantels that are more traditional in appearance. These fireplaces are perfect for homes with open hearths or those looking to convert a fireplace that burns wood into an electric fireplace that does not have chimney. These flat-wall ethanol fire places come in various sizes and include a shelf to display your decorations. These fireplaces are ideal for bedrooms, living rooms and even home offices.

A gas wall-mount fireplace is a great option for those looking to create a warm welcoming and warm feel to their home. These units come with a traditional log-set design and are available in various frame finishes including black and natural stones. They also come with a customizable LED flame color and an ember bed for a personalized touch. Certain models have an integrated TV mount for added functionality.

Certain models are designed to be hung directly onto the wall while others can be recessed partially or completely into walls. The Allusion wall-mount fireplace is small in size, which allows it to be installed into frame walls of 2x6. But, you can add a trim skirt to the exposed portion. The Allusion also has a convenient remote control and multiple heating settings, so you can enjoy your fireplace year-round.

Surface-mounted electric fireplaces typically project 4" to 6.5" into the room, which makes them easier to install than models that are recessed into the wall or electric Fires constructed from the wall cavity. They're also a great option for tenants who don't want have to deal with the hassle of drilling holes into their walls. If you move, you'll be able to easily move or relocate your fireplace.