Ten Things You Shouldn t Post On Twitter
How to Change a Subaru Spare Key
If you lose your Subaru car key, contact a locksmith. Locksmiths will usually cut you keys at a lower cost than the dealer.
Fob remote "push to start" intelligent keys or a plain metal key are the two most common types of subaru replacement key uk car keys. The Fob key is equipped with an embedded chip that it will require reprogramming.
Keyless Entry System
The key fob can be used to lock and unlock your Subaru remotely. It can also open the trunk of your car or the lift gate. These remotes use the keypad inside your car to connect to your vehicle's computer.
Subaru models come with a lesser known feature called PIN Code Access. You can use a customized number sequence to start and open your vehicle. Check your owner's guide to learn how to use this feature if you have a Subaru Forester, Outback Crosstrek, WRX STI or Impreza.
If your keys stop working, there's an excellent possibility that the battery in the key fob is dying. You can check the battery life of your key fob with the portable tester or multimeter you can find in your garage.
The next step is to take the circuit board that controls the transmitter from the key fob and examine it. You'll be able to see one or two 8-digit sets. Note the first set so you can remember it. After you've completed that you can put the key fob back together and you'll be able to begin programming it at home. The procedure for programming differs based on the make and year of your vehicle but it's usually easy enough to complete yourself.
Key Fobs
Subaru's latest models have key fobs that can not only unlock doors, but also turn on lights, lock gas cap and even start the car. This is especially useful if you have ever encountered yourself at the gas station and your car won't even start because the battery in the key fob has failed.
Whether your Subaru is new or old, it's likely that the key fob is able to be replaced with minimal difficulty. It's important to remember that newer models with a high level of technological sophistication may require a trip to the dealership. However, with just a little time and effort, you can find a replacement key fob to use at home.
Start by opening the case, and then examining the circuit board of the transmitter. (Instructions on how to open the case are usually included in the owner's manual). It should have two or three serial numbers, each of which has 8 digits long. Write down the first number series and keep it in your wallet for reference later.
Then, sit in your driver's seat and shut all doors. Turn the key to start the vehicle, then turn off after 10 turns. Press the lock button on the key fob and open the door to check that all of your doors are functioning properly. Close the door, then take the key off. You should hear your car beep again, indicating that the key fob is programmed.
Ignition System
The key battery may be dead If your Subaru keys don't work as they should. You can replace the key fob battery on your own if you know how. The replacement battery is inexpensive and easy to locate. If the key fob you have doesn't respond to your commands, there could be a different issue. It's best to visit a dealership to purchase an extra key. They will ensure that the key is an original Subaru key, under warranty, and is programmed to your vehicle. This is far more secure and less expensive than purchasing an aftermarket key from a company on the internet.
You can also have the dealer cut a new key if you provide them with your VIN number as well as evidence of ownership. The information provided will be used to identify the new key so that it is accepted by your immobilizer. This process is more involved than simply cutting a key, and the dealer will generally charge a higher price for this service.
After the new key has been programmed then you'll be able switch it to your current key. It takes just five seconds to insert the new key, so make sure to keep your working keys close at hand. Once the security light stops flashing it's time to remove the new key and check it to ensure that it's functioning correctly.
Battery Replacement
Subaru fobs are very beneficial because they can turn on the sunroof and power windows of your vehicle with just one button press. The battery inside your Subaru fob wasn't made to last forever, and it will require replacement at some point. This short guide from Capitol Subaru will help you to replace the battery on your own.
To begin you'll need to find the small crevice within the seam that separates the back and front of your key fob. It is possible where to get a subaru key made open this gap using a flathead screwdriver to reveal the small compartment that contains the battery. Remove the battery that was in it, and then insert a new one, ensuring that it is facing the right side upwards. After you've put everything together is in place, you can use your new key fob for locking, unlocking, and starting your vehicle.
It's always recommended to have an extra set of keys on hand particularly if you've lost yours or not working properly. A new key can easily be purchased at your local auto dealer or you can request one made by the locksmith. In either case, it's vital to get your key fob functioning properly in the shortest time possible to ensure you drive in a safe manner!