What Experts From The Field Want You To Know

How to Replace the Replacement Key Battery For the Saab 9-3

Saab owners have a distinct set of steps to add the second key. This requires a handheld computer, called Tech-2 that is operated by the dealer. A new key and transponder need to be bought and programmed to the car.

Rotate your keys to prevent one from deteriorating faster than the other. This will also keep your keys in pristine condition.

Replacement Case

In contrast to the traditional Saab keys of old keys, the new key fobs have electronics inside that make it difficult to make a copy. This has made stealing cars significantly more difficult than it was just a few years ago. However, it also has made the replacement of lost keys a much more expensive endeavor.

Every owner of a saab 9-3 replacement key 9-3 must have at least two working keys. It costs a fortune to replace a lost key because it requires replacing the CIM module, as well as changing the locking cylinders. Dealers typically charge between $100 and $200 to do this.

There are several ways to get around the high price. Some parts suppliers will use the code of a spare key to cut a brand new metal blade for less than the cost of the dealer. The key must, however, be the same as the original to work correctly within your car.

You can also replace the case yourself by following these steps. You'll require an open-faced screwdriver and a lot of patience. With the screwdriver, slowly pry the plastic apart and separate the emergency key from the case. Once you have the case opened, take out the electronics and place them into the new case. Place the key with the correct badge inside the case.

Replacement Battery

The Saab 9-3 replacement battery is an inexpensive part that can be quickly and easily replaced. This YouTube tutorial for DIY Cyclone Cyd, a user on YouTube, explains how to replace the remote key fob battery in just four steps. This guide should work with any modern-day saab key fob however, the procedure may differ slightly.

The first step is to find the button that lets off the backup key on the fob. It is usually located near the saab 9-3 key replacement logo on the back of the fob. Then use a flathead screwdriver to insert into the tiny hole in this button. This will allow you to open the case of the fob to allow you to replace the battery.

After you have installed the battery CR1632, you are able to reassemble the remote key fob. You can then program it into your car. The entire process should not exceed an hour. It's a simple procedure that doesn't require any special tools.

The process is more complicated in the event that you lose your key, but still possible. The dealer needs to first determine the VIN of the vehicle before requesting an additional TWICE module and key blade with the correct unique code. After that, they will need to cut the replacement key and then program it with the latest software tool known as MDI.

Replacement Key Fob

The key fob is the part that locks and unlocks your car. It has a battery within. The batteries are able to last for that is a long time, and they eventually go out of service. This is a regular issue that affects all cars and the good thing is that you can replace the batteries in most key fobs without having to replace the whole case. Amazon sells replacement fobs that have all the electronics installed. It is easy to open the case and replace the batteries. You'll need to remove the emergency key before you can replace the batteries. To do this, you need to insert a small screwdriver that is flat into the slot that is in the middle. The case will split when you turn the screwdriver around it.

If you're planning to replace your keys, keep a spare in your possession. This can save you a lot of money. If you have an additional key, you can request the dealer to cut it in half and program it to your vehicle. This is a lot less expensive than purchasing a new fob.

If you don't have a spare one, you can add another key to your car, however this will require a lot of research and effort. It costs around a hundred bucks to add an additional car key. The computer of the vehicle also has to be programmed. This can be done by a professional, however it's a costly option for most owners.

Replacement Ignition

As opposed to the earlier saab 93 key automobiles, the new SAAB 9-3 models feature an upgraded alarm system that is dependent on a coded keys. If you lose your sole key, it could be costly to replace it with another one since the car needs to include a computer and also be programmed to accept a brand new key. Most locksmiths can't do this, and even dealers can charge several hundred dollars just to program the new key!

Dealers will charge you top dollar to replace your car's computer (also known as the CIM or SAAB twice) if you lose your sole working key. Instead we can reprogramme the EEPROM in your current car computer to make it ready for an additional key, and save you over 50% of what you'd pay at a dealership.

If you've been a faithful owner of an 03-11 saab Spare key 9-3, you likely have noticed that the ignition switch isn't all that durable. If the ignition key you have isn't working properly, you should look into replacing it. They can become extremely sticky and the buttons are known to fall off. Fortunately, replacing the ignition key isn't as difficult as it sounds and is fairly easy to do with the proper tools.